BOREE Computerized Flexo Printing Slotting Die-Cutting Machine

Feeding Unit：

Lead feeding system with four-shaft-structure is controlled by the servo motor, which is imported from Germany（Optional equipment— kick feeding）.
Machine unit open or close is motorized controlled with alarm, pneumatic inter lock, over load protection.
Lead feed system with four-shaft structure and frequency converter control the suction to make sure feeding accurately and stably.
Double feeding rollers device can ensure the best stabilization in feeding.
Dusting device adopts synchronous lifting structure（the wind section can adjust accordingly）to make sure dusting function more perfect.
Double layer rubbers of the feeding roller（ its inside is soft and outside is hardness）protect the strength of corrugated board.

Printing Unit：

The circumferential position is adjusted by both computer and motorized and digital display.
Quick lateral adjustment control guide wheel, gap adjustment with self-locking function.
Equip with the synchronous lifting device, the guide connecting board transport corrugated board smoothly.
Pneumatic control clip section of anilox roller and rubber roller, which can get good effect for testing and adjusting.
Roll-locking device is easy to located the flexo plates and lock it on both side.
The circumferential is auto-reset, which is equipped with cycle washing system to save ink.

Slotting Unit：

Transversal movement of slotting knife, pre-pressing wheel and creasing wheel are controlled computer and motorized; able to store order.
The structure of regulating slotting phase is planetary gear system.
It can reset electrically with 360 degree adjustment(no matter running or stopping)
Balance adjustment can enhance the stability of the machine.
Pre-pressing wheel: after pre-pressing, cardboard can’t be damaged.
Upper creasing wheel is covered with polyurethane rubber to prevent from damaging cardboard.
Thickness of the alloy slotting knife is 7mm.The knife is heated and grinded high precisely, and the blade is sharp.

Die-Cutting Unit：

The circumferential position is controlled by both computer and motorized and digital display.
Die cutting pressure gap is motorized adjusted with digital display.
Auto displacement control device adjusts anvil roll, it can prolong usage time of anvil roll.
Replaceable rubber anvil equips with good wear-ability, it is easy to replace operation.
The speed difference compensation system ensure die cutting precisely.
Anvil roll repair device is convenient to prolong usage time of anvil roll and reduce consumption.

Product Name	APS II
Model	*10001800**	*10002200**	*12002500**	*14002500**	*16002500**
Max.speed (p/min)	200	200	200	180	160
Max.size of board (mm)	1000*1850	1000*2250	1200*2550	1400*2550	1600*2550
Min.size of board (mm)	260*400	260*400	300*420	380*450	400*450
Skip feeding size (mm)	1150*1800	1150*2200	1350*2500	1550*2500	1750*2500
Max.printing size (mm)	1000*1800	1000*2200	1200*2500	1400*2500	1600*2500
Thickness of printing plate (mm)	7.2	7.2	7.2	7.2	7.2
Min. Slotting size (mm)	170170170*170	170170170*170	180180180*180	180180180*180	180180180*180