BOZEN CNC Flexo Printing Slotting Die-Cutting Machine

Features:

The machine is designed and made for high quality, high speed, high efficiency, high stability and high safety, and it is convenient to order update and operate quickly.
It is made of high quality materials and parts.
It is well hardened and the ground transmission gears are hardness 50-55(HRC).
Auto zero return and auto reset.
All gaps between cylinders and rollers are computerized or motorized adjustment.
Key-free connection rings can reduce central wear, to keep stable precise printing.
All cylinder and rollers are chromed hand for ideal hardness.
Use PLC which is imported. PLC touch screen for multifunctional control.
Being able to save daily orders and can speed up the order update.
All the electric, electronic and pneumatic components are European

Feeding Unit：

Lead feed system with four-shaft-structure is controlled by the servo, which is imported from Germany.
Use vacuum suction The air volume can be set in accordance with different paperboard bending conditions for feeding paper smoothly.
Every unit equips with an emergency stop switch to
control the section movement from inside to guarantee the operator’s safety.
All units of the machine can be separated automatically and an alarm sounds during opening and closing for safe operation.
The frictional clutch is installed on transmission shaft to avoid damaging machine due to incorrect actions.
The pneumatic interlock device is equipped.
The main motor activates the protection device. If the unit is not locked. The main motor can not start.

Printing Unit：

The cylinder is made of good steel board and its surface is plated hard chromium after is grinded.
The quick hanging for me device can save more time.
Adjust the clearance of impressing roller by computer and digital setting.
Anilox roller equips with feeding system up and down automatically to protect forme and reduce the waste of cardboard.
Printing phase is controlled by PLC and touch screen ,and can be reset electrically with 360 degree adjustment (no matter running or stopping).and being able to store order.
Regulating printing phase position is motorized by planetary gear system and digital displays.
Resetting automatically after cleaning the forme.
Transversal movement is regulated by motor which can move 20mm.
Steel anilox roller: surface of the roller is plated hard chromium after it is grinded and knurled.
Rubber roller: the steel roller is covered by anti-abrasion rubber, and the middle of the rubber roller is high than two sides to ensure the printing ink transferring well.
Ceramic anilox roller: surface of the roller is covered with ceramic after it is grinded and knurled by laser. The life of ceramic anilox roller is longer than that of steel one (Enabling to be provided).

Slotting Unit：

Transversal movement of slotting knife, pre-pressing wheel and creasing wheel are controlled by PLC touch screen ; able to store order.
The structure of regulating slotting phase is planetary gear system.
Slotting phase is controlled by PLC and touch screen, and can reset electrically with 360 degree adjustment(no matter running or stopping)
Balance adjustment can enhance the stability of the machine.
Pre-pressing wheel: after pre-pressing, cardboard can’t be damaged.
Upper creasing wheel is covered with polyurethane rubber to prevent from damaging cardboard.
Thickness of the alloy slotting knife is 7mm.The knife is heated and grinded high precisely, and the blade is sharp.

Die-Cutting Unit：

Rollers: adopting high quality steel pipe and the pipe is grinded and plated hard chromium.
Adopting synchronizer to make sure the speed of die cutting roller and rubber pad roller are consistent for improving the precision of die cutting, no matter rubber pad wears. So this can ensure the shape of the cutting cardboard is same as the die cutting pattern.
Anil roller (up roller): mechanical helix fluted-roll type, transverse movement 40mm.
Die cutting phase is controlled by PLC and touch screen can reset electrically with 360 degree adjustment (no matter running or stopping).
Equipping with the rubber repair system to pro long service life and lower the cost.
Regulating die cutting phase position with planetary gear structure.
Transmission gears are made of 20CrMnTi.

SPECIFICATIONS：

Product Name	APS Ⅰ
Model	*10001800**	*10002200**	*12002500**	*14002500**	*16002500**
Max.speed (p/min)	200	200	200	180	160
Max.size of board (mm)	1000*1850	1000*2250	1200*2550	1400*2550	1600*2550
Min.size of board (mm)	260*400	260*400	300*420	380*450	400*450
Skip feeding size (mm)	1150*1800	1150*2200	1350*2500	1550*2500	1750*2500
Max.printing size (mm)	1000*1800	1000*2200	1200*2500	1400*2500	1600*2500
Thickness of printing plate (mm)	7.2	7.2	7.2	7.2	7.2
Min. Slotting size (mm)	170170170*170	170170170*170	180180180*180	180180180*180	180180180*180